Rhino Hyde Poly Liners

Rhino Hyde® polyurethane weldable liners are designed to be fastened in place by welding, no drilling holes in your chute or liner are required.


  • Ease of installation
  • Once the liner is sealed and the weld plug is in place, you have complete protection for your substrate
  • Eliminates sticking problems in most applications
  • Produced in modular shapes or standard sizes


Rhino Hyde® weldable polyurethane liners are used throughout the concrete industry in discharge chutes, holding bins, turn-head liners and mixers to reduce material sticking, reduce noise and provide protection for the underlying steel liner. Modular shapes can be designed off of your drawings so all you have to do is install the liner when ready for installation, no cutting required! Material thickness and formulation recommendations can be provided by your sales representative.

Typical application and liner thickness are listed below, liners up to 4″ thick can be produced when required.

Application Recommended Material Thickness Recommended Material
Discharge Chute                1/2″ to 3/4″ Shore A 85, 92
Holding Bin                1/2″ to 1″ Shore A 85 or 92
Discharge Pan                1/2″ Shore A 85
Turn-head Liner                3/4″ to 1″ Shore A 85 or Ceraflex Liner
Grizzly Hopper                3/4″ to 1″ Shore A 85 or 92